MD40-125，SMC真空发生器样本

    企业QQ：2880626087

    电话；021-69001039

    手机；17321017802（微信）

    邮箱；17321017802@163.com

    联系人；周彩云

    地址：上海市嘉定区江桥嘉涌路99弄6号713室

    1. Avoid energizing the solenoid valve for long periods

    of time.

    If a solenoid valve is energized for a long period of time, the

    coil will get hot and the performance may be reduced. Additionally,

    each day. Periods of energization can be shortened by using a

    Continuous energization of the solenoid valve should be less

    than 10 minutes in duration and the energization period should

    be shorter than the non-energized period. Take measures for

    any heat radiation so that the temperature is within the range

    of solenoid valve specifications when the solenoid valve is

    the peripheral equipment in close proximity may also

    be badly affected. Use a low wattage solenoid valve when the

    normally opened or latching type solenoid valve. But, do not

    energize the coil on both A and B sides simultaneously when

    using the latching type.

    Never use the vacuum equipment more than the operating

    supply pressure range as this may cause damage to the product

    resulting in potentially dangerous operation.

    mounted on the control panel. Please pay special attention to

    any temperature increases when a manifold type with 3 stations

    or more is energized continuously or when three individual

    units are placed in close proximity.

    2. Use the vacuum equipment within the operating

    supply pressure range.

    When the operating with a lower supply pressure, the vacuum

    performance will be reduced and the poppet valve will cause

    malfunction.

    solenoid valve is energized continuously or when the duration

    of the energization is longer than the non-energized period

    MD40-125，SMC真空发生器样本