YSTHK直线板式导轨,THK直线板式导轨作用

直线板式导轨是一种薄轻型直线导轨。

直线导轨适于测量仪器、

半导体制造和检验设备以及其他直线运动至为重要的应用场合。

3 action speed, acceleration and deceleration and other specifications by the load quality limit.

See P.26 ~ 32 "GLM20AP Selection Method". 

与角接触球轴承的双列式样相比，此产品实现了紧凑化及轻量化。

较大限度使结构紧凑的同时，也具有高刚性。

※4　设定可搬送质量为加速度约2G、到达较高速度1.0m/s时，可在负载比50%下驱动一定行程的质量。

by the thrust and speed characteristics of the impact of the quality of action may change.

Precision linear plate type ER type precision linear plate type rail ER type is a kind of ultra-thin ultra-light linear guide.

ER type is most suitable for precision measuring instruments, 

semiconductor manufacturing and testing equipment and other precision linear motion is an important application.

To achieve 5,000min-1 (maximum DN value of 160,000) under long-term continuous drive when the stability of the torque

在周围温度为20℃的环境下，电枢绕组平均温度为90℃时的数值。

※2　较高速度随分辨率而变化。

例：电机型式…S型、驱动器型号…TD-045CU-200AC-GA20SU、分辨率…0.1μm时，较高速度为0.3m/s。

※3　动作速度、加减速度等规格受负荷质量的限制。

The maximum transportable mass is the mass that can be delivered at an acceleration of about 0.5G.

The RAU type is an ultra-small cross roller collar 

with an inner diameter of 10 mm and an outer diameter of 21 mm (minimum model RAU1005).

但根据动作条件的不同，受推力和速度特性的影响，可动作质量可能会发生变化。 

直线板式导轨ER型 直线板式导轨ER型是一种薄轻型直线导轨。

ER型适于测量仪器、半导体制造和检验设备以及其他直线运动至为重要的应用场合。  

实现5,000min-1（较高DN值16万）下长期连续驱动时稳定的扭矩。 

2.(DIN69051)为基准

 螺母尺寸以DIN规格(DIN69051)为基准 

3.紧凑的螺母尺寸

 新研发的薄膜密封减小了螺母长度，实现了装置的紧凑化设计。

4.丰富的产品种类

 轴径φ15～φ50、导程5～20㎜的组合产品26种。

Compared with the double-row design of angular contact ball bearings, this product is compact and lightweight.

The maximum to make the structure at the same time, also has high rigidity.

※ 4 can be set to send the quality of the acceleration of about 2G, 

to reach the maximum speed of 1.0m / s, the load ratio of 50% can drive a certain trip quality.

But depending on the operating conditions, 

参见P.26～32“GLM20AP选型方法”。较大可搬送质量为加速度约0.5G时可搬送的质量。

RAU型是内径10mm、外径21mm（小型号 RAU1005）的小型交叉滚柱轴环。

YSTHK直线板式导轨,THK直线板式导轨作用